Menu
Pricing
Start a Free Trial

Uploading your AS9102 First Article Inspection Report to Net-Inspect

 

How do you upload to Net-Inspect?

Once you've completed your AS9102 first article inspection report in InspectionXpert, click the Upload to Net-Inspect button, then follow the directions to login to Net-Inspect where you can view forms 1, 2, and 3 of your FAIR. 

With a free trial of InspectionXpert you can make sure you are able to upload your First Article to Net-Inspect risk-free.

Step 1: Create or Open Project in InspectionXpert 

Open an existing InspectionXpert project or create a new project and open your PDF part drawing. 

Step 2: Balloon Your Part Drawing

After opening your part drawing in InspectionXpert, balloon your drawing. InspectionXpert will balloon the characteristic while extracting the data into the table. To learn more about how to balloon your first part drawing with InspectionXpert visit the Getting Started page or watch a full-length training

balloon and extract Net-Inspect

Step 3: Populate Form 1 from a Bill of Materials  

Open your Bill of Materials in InspectionXpert and use the OCR (optical character recognition) to quickly extract all the data into the table. This will be included in your AS9102 report. 

InspectionXpert bill of materials Net-Inspect 

Once the data is extracted, assign the columns. 

IX-bill of materials columns Net-Inspect

If your data comes in another format there are other options for capturing the data. You can select individual columns or rows. 

Step 4: Populate Form 2 from a Specifications List

The Specifications can be captured in the same way as the Bill of Materials. Open the Specifications tab in InspectionXpert and use the OCR (optical character recognition) to quickly extract all the data into the table.

Specifications List Net-Inspect 

Once the data is captured you can assign the columns. 

Column specifications List Net-Inspect 

Step 5: Import CMM data to Form 3 (Optional)

Note: If you don't use a CMM for measuring First Articles, or if you use a combination of CMM and hand tools, you can type in measurement results directly into InspectionXpert which will upload to Net-Inspect. Or if you're only using hand-tools you can publish to Net-Inspect without any measurement data and type the results directly into Net-Inspect. 

Click Add File in CMMXpert, and select the template for your CMM. Then select the file, and your CMM data will load in InspectionXpert.

Your CMM programmer does not need to have access to InspectionXpert. You will just need access to the report produced by the CMM.

When programming the measurement routine in the CMM put the balloon number inside the brackets. Where this information goes will vary depending on the CMM program you use. 

InspectionXpert CMM NetInspect 

Once your CMM data is in InspectionXpert click Auto-Assign to match by item number. Now your measurement results are shown in InspectionXpert. If you need to create a multi-piece FAI you can import multiple CMM reports. 

CMM for FAI Net-Inspect

We have over 40 CMM templates available, but if you don't see yours in InspectionXpert our team can also create custom templates for your CMM.

 Step 6: Publish to Net-Inspect

From the File Tab go to Publish, then choose Net-Inspect. 

Publish to net-inspect

 

You'll then be prompted to login to Net-Inspect. Please note, you will need an active subscription to Net-Inspect in order to view publish and view your First Article in Net-Inspect.

InspectionXpert login to Net-Inspect

Once InspectionXpert is done uploading you'll be able to find all three forms of your AS9102 First Article Inspection Report in Net-Inspect. The part number, name, and revision level will all be automatically populated from InspectionXpert.

Net-Inspect upload

In Form 3 you'll see the reference location from the grid, characteristic number, balloon number, and characteristic designator, requirements, will all be populated from InspectionXpert. 

Net-Inspect form 3

Try Uploading Your AS9102 First Article to Net-Inspect For Free

Thousands of people are using InspectionXpert to create AS9102 First Article Inspection Reports and upload them to Net-Inspect. But don't take our word for it! Get a free trial of InspectionXpert and make sure that it will work with your drawings and your CMM data. 

What to expect with a Free Trial
5 days of training emails that will guide you through learning to use the software with video tutorials. We'll show you how to use InspectionXpert to: 

  • Balloon & extract characteristic data from PDF part drawings.
  • Work with scanned (less than perfect) drawings.
  • Use the template editor to create custom report templates. 

Trial includes access to our full software, with all the features, for 14 days.

By the end of the trial, you should know if InspectionXpert will improve your inspection planning and reporting process. 

 Import CMM Data to AS9102 FAI

Get a Free 14-day Trial of InspectionXpert